ramesh441
Advanced Member level 4
soc encounter shell commands
Hello Sir,
After typing "encounter &" in terminal I am getting the following code as below and opening encounter
but from then there is no response its get hang up...
can any one help me please...........
Thanks in advance
This version requires license using cdslmd daemon.
Checking out Encounter license ...
SOC_Encounter_GPS 6.2 license checkout succeeded.
INFO: Current OA version selected: OA22
Starting console server on port vlsi03:8888 ..
sourcing /cad/cadence/SOC62/SOC62/tools.lnx86/fe/etc/rdaDSL.tcl
*******************************************************************
* Copyright (c) Cadence Design Systems, Inc. 1996 - 2007. *
* All rights reserved. *
* *
* *
* *
* This program contains confidential and trade secret information *
* of Cadence Design Systems, Inc. and is protected by copyright *
* law and international treaties. Any reproduction, use, *
* distribution or disclosure of this program or any portion of it,*
* or any attempt to obtain a human-readable version of this *
* program, without the express, prior written consent of *
* Cadence Design Systems, Inc., is strictly prohibited. *
* *
* Cadence Design Systems, Inc. *
* 2655 Seely Avenue *
* San Jose, CA 95134, USA *
* *
* *
*******************************************************************
@(#)CDS: First Encounter v06.20-p006_1 (32bit) 01/29/2007 21:55 (Linux 2.4)
@(#)CDS: NanoRoute v06.20-p009 NR070127-0950/USR45-UB (database version 2.30, 45.1.0) {superthreading v1.6}
@(#)CDS: CeltIC v06.20-p007_1 (32bit) 01/17/2007 22:29:02 (Linux 2.4.21-37.ELsmp)
@(#)CDS: CTE v06.20-p008_1 (32bit) Jan 25 2007 03:39:44 (Linux 2.4.21-37.ELsmp)
--- Starting "First Encounter v06.20-p006_1" on Thu Apr 16 00:41:44 (mem=59.5M) ---
--- Running on vlsi03 (x86_64 w/Linux 2.6.9-22.ELsmp) ---
This version was compiled on Mon Jan 29 21:55:17 PST 2007.
Set DBUPerIGU to 1000.
Set Default Mode Capacitance Scale Factor to 1.00
Set Detail Mode Capacitance Scale Factor to 1.00
Set Coupling Capacitance Scale Factor to 1.00
Set Resistance Scale Factor to 1.00
Set net toggle Scale Factor to 1.00
Set Shrink Factor to 1.00000
Hello Sir,
After typing "encounter &" in terminal I am getting the following code as below and opening encounter
but from then there is no response its get hang up...
can any one help me please...........
Thanks in advance
This version requires license using cdslmd daemon.
Checking out Encounter license ...
SOC_Encounter_GPS 6.2 license checkout succeeded.
INFO: Current OA version selected: OA22
Starting console server on port vlsi03:8888 ..
sourcing /cad/cadence/SOC62/SOC62/tools.lnx86/fe/etc/rdaDSL.tcl
*******************************************************************
* Copyright (c) Cadence Design Systems, Inc. 1996 - 2007. *
* All rights reserved. *
* *
* *
* *
* This program contains confidential and trade secret information *
* of Cadence Design Systems, Inc. and is protected by copyright *
* law and international treaties. Any reproduction, use, *
* distribution or disclosure of this program or any portion of it,*
* or any attempt to obtain a human-readable version of this *
* program, without the express, prior written consent of *
* Cadence Design Systems, Inc., is strictly prohibited. *
* *
* Cadence Design Systems, Inc. *
* 2655 Seely Avenue *
* San Jose, CA 95134, USA *
* *
* *
*******************************************************************
@(#)CDS: First Encounter v06.20-p006_1 (32bit) 01/29/2007 21:55 (Linux 2.4)
@(#)CDS: NanoRoute v06.20-p009 NR070127-0950/USR45-UB (database version 2.30, 45.1.0) {superthreading v1.6}
@(#)CDS: CeltIC v06.20-p007_1 (32bit) 01/17/2007 22:29:02 (Linux 2.4.21-37.ELsmp)
@(#)CDS: CTE v06.20-p008_1 (32bit) Jan 25 2007 03:39:44 (Linux 2.4.21-37.ELsmp)
--- Starting "First Encounter v06.20-p006_1" on Thu Apr 16 00:41:44 (mem=59.5M) ---
--- Running on vlsi03 (x86_64 w/Linux 2.6.9-22.ELsmp) ---
This version was compiled on Mon Jan 29 21:55:17 PST 2007.
Set DBUPerIGU to 1000.
Set Default Mode Capacitance Scale Factor to 1.00
Set Detail Mode Capacitance Scale Factor to 1.00
Set Coupling Capacitance Scale Factor to 1.00
Set Resistance Scale Factor to 1.00
Set net toggle Scale Factor to 1.00
Set Shrink Factor to 1.00000