Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Help me design connector to coaxial cable and measure VSWR in HFSS

Status
Not open for further replies.
T

tiszner21

Newbie level 1
Joined
Aug 25, 2006
Messages
1
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,287
I'd like to design connector to coaxial cable and measure VSWR (impedance mismatch) in HFSS. I don't know how to set boundaries and excitations. Can you help me? Please take a look on attachment.
 

Re: CONNECTOR in hfss

you need to add female connector, and you will get coax from both sides. then assign to each side waveguide port and solve it.
 

Re: CONNECTOR in hfss

tiszner21 said:
I'd like to design connector to coaxial cable and measure VSWR (impedance mismatch) in HFSS. I don't know how to set boundaries and excitations. Can you help me? Please take a look on attachment.
Click to expand...

I think you should build 3D model similar to real geometry, and define two wave ports.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top