Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Help me design a signal source to generate 50-310 MHz

Status
Not open for further replies.
L

liberal

Advanced Member level 4
Joined
Nov 25, 2004
Messages
105
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,296
Activity points
828
i want to design a signal source to generate 50-310MHz.but no VCO coverage this range.any goog idea?
 

Re: signal source design

You can generate this by mixing 2 signal sources, for example a constant 1GHz source and a VCO that covers 1.05GHz - 1.31GHz. Use a good filter at the output.

If spectral purity is not a concern, there are ring VCOs that can cover this domain.

For VCO, look at MiniCircuits website.
 

signal source design

you can generate a signal from 25-155MHz by DDS(eg. AD9954),and multiply the signal with 2, will get 50-310MHz
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top