Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Help me choose components for RF based remote control

Status
Not open for further replies.

UroBoros

Advanced Member level 2
Joined
May 5, 2004
Messages
642
Helped
19
Reputation
38
Reaction score
8
Trophy points
1,298
Location
Cochin - India
Activity points
6,463
RF remote control

Hai
I would like to do a RF based remote control using microcontrollers.

I am looking for the RF circuitary. Please guide me with a transmitter and receiver circuit with a reasonable range . Proposes to do IR like coding. the receiver should give a high or low when tx is enabled. Hope my purpose is clear!

thanks

Picstudent
 

RF remote control

Try Chipcon. I made a similar unit with their CC1000 board.
 

    UroBoros

    Points: 2
    Helpful Answer Positive Rating
Re: RF remote control

Here is an example of a PIC-based remotely controlled robot:
**broken link removed**
and RX TX used in this project:
**broken link removed**
 

    UroBoros

    Points: 2
    Helpful Answer Positive Rating
Re: RF remote control

Hai
thanks for the response.Actually I was looking for some home made transmitter and receiver circuits. But when considering the complexity associated with getting a rf link getting aligned ,is this commercial transceiver pair a good option?. What is the possible range of these boards? and what is the cost?

Picstudent
 

Re: RF remote control

Hi

Most of the low power transmitter's are up to 30 m in build space and up to 100 m in open space due to regulation {google for PART15 + FCC for more detail } .


All the best


Bobi
 

    UroBoros

    Points: 2
    Helpful Answer Positive Rating
RF remote control

Hi,

Have a look at this link:
**broken link removed**
Most readio cares and small radio airplane use this IC.
 

    UroBoros

    Points: 2
    Helpful Answer Positive Rating
Re: RF remote control

Hi,
RX1 - 433.92MHZ Receiver Module costs Rs250
Tx1-433.92 Transmitter Module costs Rs 125
Dual Relay Output RF Remote Switch Unit( complete with pic16F628) Rs-900
Two Button RF Remote complete with Battery(complete with microchip encoder)-325
Contact Future Techniks Pvt Ltd,Chennai
futuretechniks@vsnl.net
sales1@futuretechniks.com
info@futuretechniks.com
Regards
aji
 

    UroBoros

    Points: 2
    Helpful Answer Positive Rating
Re: RF remote control

Hello,

What's RS?

Could you write us prices in USD or EUR ?

Trax
 

Re: RF remote control

Hi,
Rs means Indian Rupees(INR).
1USD=43 INR
1EURO=57 INR
I am attaching
details of TX/RX modules
Regards,
Ajith
 

Re: RF remote control

Nice prices, cheeper receivers then at laipac.com

How could I make my payment? Do you deliver to Bosnia and Herzegovina?

Trax
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top