Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Help me choose a coupler for single balance mixer design

Status
Not open for further replies.

zeshan102

Advanced Member level 4
Joined
May 31, 2003
Messages
100
Helped
11
Reputation
22
Reaction score
8
Trophy points
1,298
Location
Heart of Pakistan
Activity points
649
Coupler

For single balance mixer design use for upconvertor which coupler is best if RF is of 100MHz is to be coupled with local osc freq of 2GHz and if RF is of 500MHz is to be coupled with local osc freq of 8GHz.
 

Re: Coupler

the coupler you used must think about the phase
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top