Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Help me change the built-in PSOC switch using Ultra Sonic sensors

Status
Not open for further replies.

tito_bahie

Newbie level 5
Joined
Nov 21, 2010
Messages
9
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,358
hi everyone
i have a system that consists of a GSM and a GPS module interconnected together using PSOC as a security module for cars. I use the built in switch to operate the system. if i open the first switch, the GSM module sends me a message containing GPS data. Now, I need to change the built in switch with Ultra Sonic sensors and i don't know where to start from in the Global parameters of the PSOC designer or what are the blocks that represent the Ultra Sonic sensors from the user module. Any help will be appreciated.
Thanks for your help.
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top