Re: Would this pcb work?
@Hest,
I assumed you were talking about using a SMD ceramic 10ufd, not electrolytic. SkyHigh's comment about soldering was probably intended for the SMD electrolytic types. They are just a little more difficult to solder, but still easy. The SMD ceramic is quite easy to solder. It will also give a flatter board.
So, I would go with the SMD like you show. BTW, I assume you considered that the typical mounting of SMD's is on the side opposite through hole components (i.e., the copper side). TH components can be soldered to the copper side, but it can be a little more difficult. In more advanced PCB's, you have to be careful of the mirroring that some programs automatically do for you when you intend to mount TH IC's and such on the copper side.
John