[Help] Magic setup 0.13 micron IBM process By MOSIS

Status
Not open for further replies.

raduga_in

Full Member level 4
Joined
Aug 29, 2005
Messages
199
Helped
32
Reputation
68
Reaction score
10
Trophy points
1,298
Location
India's Silicon Vally
Activity points
2,357
Hi Friends,

Has any one of you tried the stetting up of the Magic layout editor
of 0.13 micron CMOS process by mosis ?

If you have can you please let me know the process and please
share the technology files and design rules for the same.

Thanks in advance

Raduga
 

for design rule, you can check at mosis website. but the design rule valid only if you are using lambda (λ) base rule. i'm not familiar with magic. but if you can configure the design rule manually in magic, then you can set the drc according to design rule at mosis website. hope it help a bit

-evilguy-
 

Thanks "Evilguy" ..

I am in perticular looking for this process

**broken link removed**

If you have any info about this please
let me know

Regards
 

Status
Not open for further replies.

Similar threads

Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…