Hi my friend has got a 433 mhz tx and rx module.. the tx is of 4 pin and rx module is of 8 pin..but we are not having datasheets of it..the tx and rx module resembles this :
**broken link removed**
is this a serial interface..if so am i supposed to use max 232 driver??
then what is the type of transmission..it is serial right??..so i need to juz plug the appropriate pins of the module to the tx and rx pins of the microcontroller,right?
The modules accepts "Serial" Data, that does not necessarily mean you use the Usart pins on the micro.
To use those RF modules properly you need to use Manchester Encoding otherwise you will never find your transmission among all the other 433mhz signals.