Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

[Help]: How can calculate the coverage with more than 1 tb

Status
Not open for further replies.

wadaye

Full Member level 4
Joined
Jun 18, 2004
Messages
213
Helped
12
Reputation
24
Reaction score
2
Trophy points
1,298
Activity points
1,906
Hi all:

It's hard to test the a complicated verilog design with only one

testbench. So when I use more than one testbench fils to verify my

design, how can estimate the coverage? Is there some simulation tool or

coverage tool can do this work?

wang1
 

Re: [Help]: How can calculate the coverage with more than 1

It seems that cover meter can calculate the total coverage of several tbs simultaneously , and one of Cadence's tool "hdlc " can handle this too
 

Re: [Help]: How can calculate the coverage with more than 1

yinhongtong said:
It seems that cover meter can calculate the total coverage of several tbs simultaneously , and one of Cadence's tool "hdlc " can handle this too

Good news, I will try the CoverMeter, hope it works, otherwise I have to write a perl

scripts to do this work.

wang1
 

Re: [Help]: How can calculate the coverage with more than 1

CoverMeter can do it! :)
 

Re: [Help]: How can calculate the coverage with more than 1

HDLScore can do this!
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top