Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

HELP HFFS ( gain problems)

Status
Not open for further replies.
I

iveric

Newbie level 2
Joined
Nov 23, 2009
Messages
2
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Location
Spain
Activity points
1,293
Hi,

i am new with this software.
My problem is i have wrongs in my simulation with gain.
S11 and S12 must not be more than zero. i simulate resonators. i have some positive values in my simulation. see picture below please
 

plz upload ur structure after that i will try to remove that error.....................
 

iveric said:
Hi,

i am new with this software.
My problem is i have wrongs in my simulation with gain.
S11 and S12 must not be more than zero. i simulate resonators. i have some positive values in my simulation. see picture below please
Click to expand...


check your # is passes before simulating. Maybe the convergence problem messes up the matrix calculation.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top