Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

HELP for Fujitsu thermal printer FTP-628MCL103#70

Status
Not open for further replies.
S

scd

Newbie level 4
Joined
Jun 15, 2011
Messages
5
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,326
My Fujitsu thermal printer FTP-628MCL103#70 is not printing..
Any views?
 

Whether test print is functioning. then check fuse, whether it is blown out
then check paper out detection sensor is working.

---------- Post added at 23:08 ---------- Previous post was at 23:05 ----------

Whether test print is functioning. then check fuse, whether it is blown out
then check paper out detection sensor is working.
 

scd,
Your question doesnot give us any details.
Are you trying to interface it to some controller?
Is your hardware tested
Are you having issues with software
Have you tested each thermal printer parts
Were you able to run only motor first
Are you following correct timing sequence
Are you providing appropriate power input
Weather it is battery powered.

Lots of questions like this. No person on any forum will be able to help you unless you ask proper questions.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top