Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

help for a simple structure in CST

Status
Not open for further replies.
M

medanisse

Newbie level 6
Joined
Sep 29, 2010
Messages
14
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,398
Hi

I try to determine the magnetic field over a very simple structure as a conductive plane with height h = 0.8 mm and dimension 50 * 50 mm with a hole in the middle of radius r = 1 mm in CST See attached figure. But I have never used CST and I get errors during the simulation
Can you help me solve this problem by giving me a correct structure

https://obrazki.elektroda.pl/72_1304811439.jpg



Thank you very much!
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top