Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

HELP! Explanation of smith chart on CPW simulation (ADS)

Status
Not open for further replies.

asmodeus

Newbie level 6
Joined
Aug 16, 2009
Messages
11
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Location
Bristol
Activity points
1,354
Hello guys. I tried to simulate a simple 50mm CPW line. The width of the conductor line is 140um and 64um the gaps (according to ADS linecalc to maintain 50Ohm impedance). I attcahed the smith chart results of simulations and the circuit. Can please someone explain me why it looks like that? Please I need a answer on that..... I used ADS software to simulate. From the other diagram the S12 seems to be low so i guess that the reflections are low, right?
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top