Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

[help] 90 Hybrid Coupler

Status
Not open for further replies.
K

kodok128c

Newbie level 3
Joined
May 7, 2009
Messages
3
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,299
hybrid coupler

guys, i need help to tutorial desain power divider to 90 Hybrid Coupler.

plis help me :(
 

90 hybrid coupler

Hi
Check Pozar's "Microwave Engineering"
or Google. :)
 

90° hybrid

tyassin said:
Hi
Check Pozar's "Microwave Engineering"
or Google. :)
Click to expand...

tyassin thx for reply.
i have something problem, how to calculate airbox for 90 degree Hybrid branch-Line Coupler ?
 

90 hybrid

Hi

Do you simulate in HFSS?
If so, then make a box with a distance of λ/4 to the nearest point of the coupler.

If you have access to a planar simulator, I would advise you to use that. As it is properly easier to draw the coupler and faster at simulating.

Regards
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top