Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Has anyone used the DDRAM of a HD44780U LCD as a general RAM

Status
Not open for further replies.
M

Myself

Member level 3
Joined
Nov 16, 2001
Messages
55
Helped
2
Reputation
4
Reaction score
2
Trophy points
1,288
Activity points
377
Dear All,

As far as I can understand it is possible to use the DDRAM or CGRAM of a HD44780U LCD as a general RAM.

I wonder if any one of you has used it? If so could you please tell me how?

If possible please give me your project.

Myself
 

Re: Has anyone used the DDRAM of a HD44780U LCD as a general

Yes you can use the ram of the LCD without problems for general purpose even if you need to display 2 x 16 characters as the LCD has much more memory as you can see displayed (if you do not scoll the display).

I did this a long time ago on an 89C2051 when I was completly out of ram :)

The only things that speak against this are the software overhead and that you need to connect R/W of the display to an IO pin of your MCU ...

All you have to do is set the adress pointer to desired adress of CG or DD memory and write/read your databyte to/from there as if you would write a "normal" character to the display.

best regards
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top