Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Hardware Programming with Visual C++

Status
Not open for further replies.

Max++

Junior Member level 3
Joined
May 24, 2006
Messages
29
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Location
Thailand
Activity points
1,495
hardware programming in vc++

Where can I find good tutorials on Hardware Programming with Visual C++ or code samples for free. There is a good site in somewhere?
 

Pinczakko

Full Member level 2
Joined
Jul 29, 2004
Messages
138
Helped
13
Reputation
26
Reaction score
0
Trophy points
1,296
Location
Taka Bonerate National Park, Indonesia
Activity points
1,592
hardwareprogramming

I've one old application that I develop a few years ago. Named Explochip. I used it to poke around the hardware ports in the PC. Built with VC++6 SP5 and win2K DDK. Available freely at:

https://www.geocities.com/mamanzip/srccodes.html

It's a bit out of date. The architecture of the software modules are as follows:

Code:
        Explochip Application
                 ^  |
                 |  |
                 |  V
        Explochip Device Driver
                 ^  |
                 |  |
                 |  V
             PC Hardware

The code is a bit twisted as I made it only as a proof of concept.

I think some other stuff are available at https://www.codeproject.com

goodluck :wink:
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top