Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Hardware emulator 89c2051

Status
Not open for further replies.

Vermes

Advanced Member level 4
Joined
Aug 2, 2011
Messages
1,163
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,316
Activity points
22,318
20_1271250769_thumb.jpg


It is a hardware emulator 89c2051/4051. The device has a large RAM and the possibility of saving and reading by „MOVX” instruction, so you can use the emulator for testing program on processor 8051. Additionally from $f000...$ffff I/O ports were assigned, what gives the possibility of testing by means of code – systems controlled by 8051.

Features:
  • emulation of the processor – at89c2051/4051 without a comparator
  • emulation of the processor – 8051
  • save/read the memory - @movx
  • the memory range for the code $0000-$EFFF – 64k
  • range for the I/O port $F000-$FFFF – systems control
  • downloading the code in Intel HEX format
  • downloading the code in bin format
  • test commands
  • code transmission with a speed of 38400 baud-rate

Pictures:






Link to original thread (useful attachment) – Sprzętowy Emulator 89c2051 - modyfikacja z PE 10/99
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top