Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

H- bridge at 30kh PWM

Status
Not open for further replies.

qweets

Junior Member level 2
Joined
Dec 18, 2010
Messages
21
Helped
1
Reputation
2
Reaction score
1
Trophy points
1,283
Activity points
1,447
hello everyone. I hope all is well.

i am looking around for a H- bridge that is able to handle approx 30 kh PWM and offer 10v at around 900ma for my motor.

My h bridge does not like such a high frequency so really need to upgrade.

thanks for any help : )
 

If the type is "step-motor" you should think about insulated driver stage to avoid noise to microcontroler.
 

hello thank you both.

i managed to order a L6202 POWERDIP18 yesterday. it is for a dc motor 10v 900ma. so hopefully it should work out.

have a great Christmas. : )
 

hello.

I wonder if anyone knows what rated resistor (in watts) would i need for the "R2" 10 ohm in this schematic below for my h -bridge, i fear i may melt one if i get it wrong .

i am using a 10v motor that has a peak amp usage of aprox 900ma.

**broken link removed**

thanks for any help : )
 

You can use 0.5watts.
 
  • Like
Reactions: qweets

    qweets

    Points: 2
    Helpful Answer Positive Rating
hey thanks so much !!

merry Christmas kabiru : )
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top