Guide on soldering SMD components on veroboard.

Status
Not open for further replies.
S

Sunny55

Full Member level 3
Joined
Sep 15, 2012
Messages
159
Helped
12
Reputation
24
Reaction score
12
Trophy points
1,298
Activity points
2,404
Hi, has anyone here tried soldering SMD components on veroboard? Could you share your experience with me as its my first time working with SMD components on veroboard.

Thanks alot.
Sunny55.
 

How do you intend to that, do you have a board that has a small pitch to match the SMD?
Usually these boards re 100mil so I'm not sure you can solder an SMD on them (50th or less)
 

alexan_e said:
How do you intend to that, do you have a board that has a small pitch to match the SMD?
Usually these boards re 100mil so I'm not sure you can solder an SMD on them (50th or less)
Click to expand...

I am not sure about the track width of the veroboard. I am just going for the common veroboards in the market.
 

My suggestion would be to buy a dip adapter for your chip, like this
 

Soldering SMD components to veroboard

1206 Capacitors and Resistors and the tri leg BSS138 and MCP1700 are just about solderable to a prototype board, although no points for appearance.
Solder was melted to board, components placed and then solder reheated (reflowed), could have used less solder.
 

Status
Not open for further replies.

Similar threads

Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…