Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

[SOLVED] GSM module using PSoC

Status
Not open for further replies.
T

tito_bahie

Newbie level 5
Joined
Nov 21, 2010
Messages
9
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,358
Hi everybody
I am new to using PSoC and i am seeking help to connect a GSM module and send messages through UART tx of a CY8C29666-24PVXI PSoC using AT commands
Thanks
 

refer to any thread about gsm interfacing ... its same for your controller....

first test it iwith hyper-terminal and then take a sample code from the forum and analyse it and write it yourself.......
 

i have tested it with hyper-terminal and its working but i cant find a code for testing it with the micro-controller's UART
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top