Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

gsm modem sim900 problem

Status
Not open for further replies.

Noman Yousaf

Full Member level 4
Joined
Nov 19, 2003
Messages
208
Helped
3
Reputation
6
Reaction score
2
Trophy points
1,298
Location
Lahore Pakistan
Activity points
1,763
hi all
i have been using gsm modem SIM300DZ only for sending or receiving the sms's. now i want to use SIM900 intead of SIM300. can u tell what i have to do more? or these are same for such purpose. what are the diffrences between both modems?
please reply soon

---------- Post added at 16:04 ---------- Previous post was at 16:03 ----------

and from where, i can get the datasheet of SIM900?
 

Hi Noman Apart from the voltages on the I/O, the main and most annoying difference is that the sim 900 only accepts AT commands in upper case. I have attached a couple of file which may be of use.
 

Attachments

  • SIM900D_SIM300D340D_HD_Comparison_V1.02.pdf
    117.7 KB · Views: 71
  • SIM900_Sim300_ATC_Comparison_V1.01.pdf
    957.9 KB · Views: 79
  • SIM900_Specification_V1102.pdf
    132.1 KB · Views: 67

Here are the files uploaded again. If you still cannot download them IM me with your e-mail address so I can send them directly
 

Attachments

  • SIM900_Sim300_ATC_Comparison_V1.01.pdf
    957.9 KB · Views: 61
  • SIM900D_SIM300D340D_HD_Comparison_V1.02.pdf
    117.7 KB · Views: 57
  • SIM900D_SIM300D&340D_Comparison_Hardware Design_V1.03.pdf
    118.9 KB · Views: 51
  • SIM900D_Specification_V1102.pdf
    125.9 KB · Views: 61
  • SIM900_Hardware Design_V2.00.pdf
    2.9 MB · Views: 55
  • SIM900_Specification_V1102.pdf
    132.1 KB · Views: 58

sim 900 only accepts AT commands in upper case.

This is not true. I have SIM900 and it accepts at commands in both upper and lower case.

Regards.
Salman.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top