Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

GSM communication with static IP via GPRS

Status
Not open for further replies.
H

hemnath

Advanced Member level 3
Joined
Jun 24, 2012
Messages
702
Helped
61
Reputation
120
Reaction score
57
Trophy points
1,308
Location
Chennai
Activity points
6,588
I'm new to GSM technology. I have read some notes about GSM. But still find a place to settle into GSM. My project is about, microcontroller which reads some data and i have to send that data using GSM modem to static IP address. How to do that? Please help. Also i thought of buying SIM900 module. Well, is it good? (or) do i have to switch over to any other module?

I have looked into website sim.com. There are many module SIM900, SIM900B, SIM900D, SIM900S. Which one i have to buy? what are the differences between them?

Do i have to use RS232 to interface with SIM900?

Please help!!!
 

can i use only AT commands to do? or do i have to learn TCP/IP protocol?
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top