lucianom
Newbie level 3
Hello,
someone can tell me how to properly connect the ground.
The primary side is actually connected to ground, while the secondary side is floating (not ground connection)
I have tried not to put ground in the secondary (leaving floating), but the simulations are not correct.
I add a schematic at the end.
Thank in advice.
someone can tell me how to properly connect the ground.
The primary side is actually connected to ground, while the secondary side is floating (not ground connection)
I have tried not to put ground in the secondary (leaving floating), but the simulations are not correct.
I add a schematic at the end.
Thank in advice.