Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronic Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Greeting...I am trying to Connect two PIC microcontrollers

Status
Not open for further replies.

Freestyle

Newbie level 1
Joined
Nov 16, 2012
Messages
1
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,289
800px-Real-time_Spectrum_Analyser.pngHi Everyone,

I join here looking for ideas and help on a project that I am trying to build. What I want to have the main system which I am showing here with the schematic. I want to have a 3x4 keypad for the user to input values. What I came across is that all the pins on that schematic are being used. So the question of using two pics came across, one as a slave and one as a master. But I have no idea how the wiring/ connection are going to be. Once I figure that out I will look into the coding next.

This is the 3x4 device, http://www.pcreview.co.uk/forums/3x4-keypad-pic18f452-t3043773.html
I am using a PIC18F4550, http://ww1.microchip.com/downloads/en/devicedoc/39632c.pdf
 
Last edited:

Status
Not open for further replies.
Toggle Sidebar

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top