Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

GPS receiver design,please help.

Status
Not open for further replies.

sinak

Newbie level 6
Joined
Feb 26, 2006
Messages
11
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,347
Hi. currently Im working on a proje:GPS RECEIVER DESIGN.You see,I've a big problem.May anybody help me please?What should I do first?
 

huh... very difficult project
especially if you dont know where to start !!!
 

Yes,its very difficult,and thanks Budhy but could you explain that where I should start from,which topic I should study first?And,do you know a good book about GPS receiver design?..thanks again
 

Start from here
**broken link removed**
**broken link removed**
 

thanks Budhy,but its not enough for me.Its so hard and
I thınk so I should walk step by step, I hope you see.
So,ıts a block diagram and ıts parameters that you must measure,
and now you should study on this topic
about receiver..like that Budhy.
So,I need a very wide acconts about this project
,especially ptactically and step by step I said..
Thanks again
 

Please take a look at :
GP4020 GPS Receiver Baseband Processor
**broken link removed**

AN4855 - GPS Receiver Hardware Design
**broken link removed**

GPS and DGPS Overview, With a Complete RF Front-End Design
**broken link removed**
**broken link removed**

Global Positioning Satellite (GPS) Receiver Block Diagram
**broken link removed**

Course 452:
Navigation Receiver Signal Processing:
Advanced Baseband Processing for High Performance GPS Receivers
**broken link removed**

and much more... googling with GPS receiver design
 

I need lots of and different documents about this project.

Added after 22 minutes:


could anybody give me some advice about how to design a GPS receiver step by step.thanks
 

The easies way, better start from chipset.
There are many chipset profider for GPS ie:
Navtech, or Atmel, or Motorola.

After choosing the chipset, then start to get their reference design, to have your own GPS.
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top