Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronic Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

GPRS based digital energy meter billing monitoring system..

Status
Not open for further replies.

sherykhan

Newbie level 3
Joined
May 2, 2011
Messages
3
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Location
:-)
Activity points
1,300
I Want To Send Data From Digital Energy Meter to GPRS Modem Sender Side and Then GPRS Modem will Send that Data to Internet Cloud..From internet Cloud i will Receive Data through GPRS Modem Receiver Side.
Problem is That How I Will Interface Energy Meter With GPRS Sender Side..Which Micro-controller Will Be Used...And How I Will Program.
Kindly Help.
:-(
 

sherykhan

Newbie level 3
Joined
May 2, 2011
Messages
3
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Location
:-)
Activity points
1,300
but i think in 8051 controller there is no A/D...and in PIC controller there is A/D..
please help me...i wll be very thankfull.. :-(
 

ckshivaram

Advanced Member level 5
Joined
Apr 21, 2008
Messages
5,070
Helped
2,149
Reputation
4,304
Reaction score
2,089
Trophy points
1,393
Location
villingen (Germany) / Bangalore
Activity points
30,097
go for philips 8051 (P89v51rd2BN) , they have AtoD converters or go for pic 16f877 series..

there are many controller in 8051 series with ADC..
 

thunderboympm

Full Member level 5
Joined
Sep 17, 2007
Messages
244
Helped
32
Reputation
64
Reaction score
29
Trophy points
1,308
Location
Malappuram, India
Activity points
2,468
I Want To Send Data From Digital Energy Meter to GPRS Modem Sender Side and Then GPRS Modem will Send that Data to Internet Cloud..From internet Cloud i will Receive Data through GPRS Modem Receiver Side.
Problem is That How I Will Interface Energy Meter With GPRS Sender Side..Which Micro-controller Will Be Used...And How I Will Program.
Kindly Help.
:-(
first of all you need to understand about the WIP commands of GPRS. you want to decide,
1) to where you are uploading and downloading
2) how can you read the data (you can read the unit by just placing a LDR to the caliberation LED and just count the blinking and calculate the unit other wise do everything as in the conventional energy meter)
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top