Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

GLCD 12232 (controller sbn1661g)

Status
Not open for further replies.
J

JAMAL JIMI

Member level 1
Member level 1
Joined
Dec 14, 2013
Messages
40
Helped
0
Reputation
0
Reaction score
0
Trophy points
6
Visit site
Activity points
233
Hi........I am interfacing a GLCD 122x32 with 89c52 but it doesn't work.....can anyone please give me an assembly example code for displaying some pixels on the LCD?

The GLCD controller is SBN 1661g...
 

JAMAL JIMI said:
Hi........I am interfacing a GLCD 122x32 with 89c52 but it doesn't work.....can anyone please give me an assembly example code for displaying some pixels on the LCD?

The GLCD controller is SBN 1661g...
Click to expand...



Hi,

Just looking at that displays datasheet it seems very similar to the old KS0108 display which also uses 2 controller chips, each controlling just half the screen.
Bit surprised to see a twin controller on a relatively modern display; datasheet dated 2012.

Using a twin controller makes programming a lot more complicated.

Its usually better to find some well proven glcd program code then buy the matching display rather than the other way around.
Something like a 128x64 glcd is much more common for the hobby market.

Have written Pic assembly code for a couple of glcds from scratch, but its a lengthy and time consuming process.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top