Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronic Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

generating 10V ac with 555 timer

Status
Not open for further replies.

roronoa

Junior Member level 2
Joined
Dec 4, 2007
Messages
23
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,461
Hi evryone, i know that 555 timer can be used to generated certain frequency by adjusting the resistors.

Therefore , is it possible to used it to generated a 10V Ac?and how can this be done?

Thanks for replyin
 

flatulent

Advanced Member level 5
Joined
Jul 19, 2002
Messages
4,629
Helped
489
Reputation
980
Reaction score
150
Trophy points
1,343
Location
Middle Earth
Activity points
46,689
You will probably need a transformer to connect between the 555 output (via a capacitor) and your load.
 

elrayes

Full Member level 5
Joined
Jun 3, 2008
Messages
246
Helped
20
Reputation
40
Reaction score
7
Trophy points
1,298
Location
Egypt/Canada
Activity points
2,780
the 555 power supplied with 5 to 18 volts, then use a high voltage like 14 volts to supply your 555 IC, or use a MOSFET at the output to switch the output around 10v to get your 10v AC.
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top