Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

FSK transmitter and reciever

Status
Not open for further replies.

mohsen81

Newbie level 4
Joined
Jan 14, 2006
Messages
7
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,340
fsk transmitter and reciever

Hi
I want to build a FSK transmitter and reciever.
Could you help me how to build it .
I need the schematics
 

mohsen81

Newbie level 4
Joined
Jan 14, 2006
Messages
7
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,340
thank u but i want to build a discrete FSK transmitter and reciever, not by using one chip which does all of the modulation.
I want to build each part of modulator and demodualtore seperately !
 

kevinj

Advanced Member level 4
Joined
Jan 19, 2006
Messages
118
Helped
8
Reputation
16
Reaction score
4
Trophy points
1,298
Activity points
2,233
what frequency?
 

mohsen81

Newbie level 4
Joined
Jan 14, 2006
Messages
7
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,340
Hi
Frequencies in ISM band or 1-10 MHz or 433 MHz
 

springf2000

Full Member level 6
Joined
Jun 13, 2004
Messages
382
Helped
20
Reputation
40
Reaction score
2
Trophy points
1,298
Activity points
2,510
use the PLL as the FSK transmitter and the receiver
 

kevinj

Advanced Member level 4
Joined
Jan 19, 2006
Messages
118
Helped
8
Reputation
16
Reaction score
4
Trophy points
1,298
Activity points
2,233
ISM band : 900MHz. https://rfic.eecs.berkeley.edu/~niknejad/ee142f06/index.html

The site shows LNA, VCO, Mixer, VGA...receiver.

You'll have to add a PLL (which you'll buy) to control the VCO

You'll have to create the FSK modulation on your own...

the project will be difficult because i think you'll need to build each block individually and test each. then add all building blocks together.

UCLA also has built a discrete transmitter / receiver that i've seen on the internet.

i'm not sure what kind of commitment you want to put in because if you build a system from a schematic, it still may not work...let me know.
 

UroBoros

Advanced Member level 2
Joined
May 5, 2004
Messages
642
Helped
19
Reputation
38
Reaction score
8
Trophy points
1,298
Location
Cochin - India
Activity points
6,457
Hi

I want to send digital data over a wireless network as FSK or DTMF.

RF link is present (VHF transceiver)

I have to only encode and decode data using FSK at both ends

Which is the simple solution to do the encoding and decoding.

Any readymade low cost modules or chips or any arrangement ?

please

picstudent
 

7rots51

Advanced Member level 4
Joined
May 17, 2002
Messages
1,184
Helped
25
Reputation
50
Reaction score
12
Trophy points
1,318
Activity points
9,637
NE565 may be used for FSK.
MT8888 MT8870 for DTMF
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top