Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronic Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Frequency to voltage conveter using digital gates

Status
Not open for further replies.

faiq khalid lodhi

Newbie level 6
Joined
Jun 1, 2010
Messages
14
Helped
1
Reputation
2
Reaction score
1
Trophy points
1,283
Location
Pakistan
Activity points
1,366
hi every one

can any tell me that how can i convert the frequency into the voltage by using the digital gates only.
 

luben111

Advanced Member level 1
Joined
Mar 2, 2002
Messages
490
Helped
111
Reputation
223
Reaction score
107
Trophy points
1,323
Location
UK
Activity points
3,890
for lower frequency range you can start charging some RC on positive edge of the signal and make Sample/Hold at the negative edge (plus discharging the RC after that).
 

Status
Not open for further replies.
Toggle Sidebar

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top