Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

frequency characteristics of 0ohm resistor?

Status
Not open for further replies.

kwagjj

Member level 1
Joined
Apr 13, 2009
Messages
32
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,286
Activity points
1,539
while searching through 0ohm resistors, I noticed that all the datasheets that I came across do not have any information about frequency response of the resistor.

I did read a comment somewhere saying that 0ohm resistors tend to work well even at pretty high frequencies but didn't give a specific number nor a reference.

My circuit's target frequency is 2.4GHz.

Should I be concerned about severe characteristic changes of 0ohm resistors?

Would appreciate is someone could give an empirical value on how high frequency 0ohm resistors tend to work properly.
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top