An_RF_Newbie
Member level 3
Hello,
I need to know why the output of the FreqMult component is not correct in this simulation. As you can see the difference between my input frequencies is not (87Mhz) multiplied correctly( I can't see (X3) 261 or (X5)435 Mhz frequencies).
In addition: I have set G1=G2=G3=G5=-20 or different values (in the uploaded ADS files these values are not inserted) but it doesn't work
here is my ADS simulation file: https://gofile.io/d/x2ZPQT
I need to know why the output of the FreqMult component is not correct in this simulation. As you can see the difference between my input frequencies is not (87Mhz) multiplied correctly( I can't see (X3) 261 or (X5)435 Mhz frequencies).
In addition: I have set G1=G2=G3=G5=-20 or different values (in the uploaded ADS files these values are not inserted) but it doesn't work
here is my ADS simulation file: https://gofile.io/d/x2ZPQT