FPGA Programmer Based on AVR

[semofa]

hi everybody
i have a project in university and i'm asking for help.
i had to build an fpga programmer(that program any FPGA brand)just with AVR.
i serched alot but i can not found anything. please help me

 

[TommiRouvali]

Hi, a have build board with Spartan 6 and on that board is also atmega8 that reads SD card via SPI interface and pushes configuration into Spartan. Configuring Spartan is quite easy. You just clock serial data in and check few pins when you are done. I can upload code and schematics if you like? (Eagle format)

 

[bigdogguru]

i had to build an fpga programmer(that program any FPGA brand)just with AVR.

The Mojo v3 utilizes a ATmega32U4 for just such a purpose to program a Spartan 6 XC6SLX9 FPGA.

You can find the schematics and code for the design at the following:

Mojo v3 FPGA Development Board

Mojo v3 website

BigDog

 

[semofa]

hi and thanks for replies
i want a programmer that can program any FPGA brand through USB. and i had to use AVRs that doesn't have JTAG on it.