Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

FPGA board, Mobile device communication

Status
Not open for further replies.

picko_again

Newbie level 5
Joined
Apr 16, 2007
Messages
8
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,343

I have a problem connecting a spartan 3 board with a mobile device through it's USB port...a spartan 3 starter kit has no USB port for communication so we need to use its RS232 port..and as the mobile device must communicate through USB so we need some kind of a converter in between...
please if anyone faced such a problem or have any idea how to do such communication please say..thanks in advance...
 

xstal

Full Member level 2
Joined
Oct 12, 2006
Messages
138
Helped
20
Reputation
40
Reaction score
0
Trophy points
1,296
Location
USA
Activity points
2,197
Hi,
well, you can use USB to UART bridge.

Do you have UART core available in your kit anyway?
 

picko_again

Newbie level 5
Joined
Apr 16, 2007
Messages
8
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,343

Thanks for your help..but from this data sheet you must setup some drivers first this is a main problem we faced as we can't do this on a mobile device...so we need another hardware solution...
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top