Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

for high power led driver

Status
Not open for further replies.
H

homik52

Newbie level 6
Joined
Dec 30, 2010
Messages
12
Helped
2
Reputation
4
Reaction score
2
Trophy points
1,283
Activity points
1,367
if i am using 12v 42Ah battery that is connected to the 8 watt high power led circuit then how much voltage and current it shoud take for 1 hour?
 

I don't know what you are asking exactly.
You battery can provide 12v/1A for 42 hours or 12v/2A for 21 hours etc.
Your led consumes 8W per hour but the consumption on the battery has to do with the efficiency of the led driver and the total consumption of the led+driver.

Alex
 

If the system were 100% efficient, which it won't be, the nominal run time would be 60 hours.
 
Last edited:

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top