Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronic Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

FM Modulator using FPGA - Directions required

Status
Not open for further replies.

nandopg

Full Member level 4
Joined
Apr 26, 2001
Messages
205
Helped
8
Reputation
16
Reaction score
3
Trophy points
1,298
Location
Over the Rainbow
Activity points
2,540
Dear friends,
I would like to have some directions as system arrange, pertinent literature, development boards, software, chip set, etc... to design a FM modulator using FPGA.

The modulator should have the following specs:
Output frequency range: 11MHz to 11.5MHz
Deviation capability: 12.5KHz
Analog Input signal: Band limited to 100KHz

I thanks any help.

NandoPG
 

Status
Not open for further replies.
Toggle Sidebar

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top