Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

FIR Filter Design Problem using FDA Tool in Matlab

Status
Not open for further replies.

mahaju

Full Member level 2
Joined
Mar 17, 2007
Messages
125
Helped
7
Reputation
14
Reaction score
2
Trophy points
1,298
Activity points
2,252
FIR Filter Design Problem using Window method using FDA Tool in Matlab

Hello
I need to design FIR filter with cutoff frequency 100 Hz (with attenuation 3 dB at cutoff frequency), sampling frequency = 1000Hz and having 3rd order Butterworth characteristics, using the various types of window functions

Can anyone give me some ideas on how to do this?

Also, could you please tell me how to do this in FDA Tool of Matlab?

Thanks
 

have you ever run fda tool?
Every thing is clear.
Yu can enter your data infront of proper fields and then design the filter. At last export the filter coefficient to workspace.
It is so easy.

BR
Oveis
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top