Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Finding Difficulty in Selection LED MATRIX

Status
Not open for further replies.
A

aameer

Full Member level 4
Joined
May 12, 2010
Messages
216
Helped
33
Reputation
64
Reaction score
32
Trophy points
1,308
Location
Bangalore
Activity points
2,503
Hello Friends,
I am working on a multiline indoor single color LED display board project.
I am confused which type LED I HAVE TO PURCHASE..P6 OR P10 OR P4 OR any.
Tye display size should b around 2 to 3 sq.mtr
It should display static 100-150 words
Please guide me
Thanking you
 

Attachments

  • Screenshot_20210306-194236_YouTube.jpg
    Screenshot_20210306-194236_YouTube.jpg
    654 KB · Views: 108

What's you specific problem? The shown LED display is 192x128 pixels, about 2,5 square meters using P10.
 

If i use p10 display it will be very large to display 100 characters or that much lines..
i need around 1ft x 2ft
 

A popular LED module could be 32x16 LEDS, total of 48 modules for the discussed display. E.g. https://www.led-card.com/indoor-smd-fullcolor-led-module-p10.html
--- Updated ---

aameer said:
If i use p10 display it will be very large to display 100 characters or that much lines..
i need around 1ft x 2ft
Click to expand...
Why are you saying 2 to 3 square meters in your initial post? 1ftx2ft is 0.18 square meters. Anyway, I'm sure you can calculate yourself. Please reconsider and come back with plausible questions if there are any.
--- Updated ---

6 modules of 64x64 P3 size might fit the small form factor. https://www.led-card.com/p3-full-color-smd-led-module.html
 
Last edited:

FvM said:
A popular LED module could be 32x16 LEDS, total of 48 modules for the discussed display. E.g. https://www.led-card.com/indoor-smd-fullcolor-led-module-p10.html
--- Updated ---


Why are you saying 2 to 3 square meters in your initial post? 1ftx2ft is 0.18 square meters. Anyway, I'm sure you can calculate yourself. Please reconsider and come back with plausible questions if there are any.
--- Updated ---

6 modules of 64x64 P3 size might fit the small form factor. https://www.led-card.com/p3-full-color-smd-led-module.html
Click to expand...
Does p3 come in single color like red or white
I need 1ftx 2ft ..sorry wrong info before
 

Hi,

I don't know what P10 or P3 means...
But when I read the link text of post#4 it clearly says"P3-full-color".

Klaus
 

P3 means 3 mm LED matrix pitch, P10 10 mm respectively.

@aameer: You can google for "P3 monocolor LED module".
 

FvM said:
P3 means 3 mm LED matrix pitch, P10 10 mm respectively.

@aameer: You can google for "P3 monocolor LED module".
Click to expand...
I am finding Difficulty in searching p3 single color in india... Except P10 all other type r available in full color...will u plz help me.
 

Hi,

Did you contact the manufacturer? Or at least it's internet page to find for distributors?

Klaus
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top