Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Filter resists to frequency change

Status
Not open for further replies.

buark

Junior Member level 1
Joined
May 29, 2005
Messages
17
Helped
2
Reputation
4
Reaction score
1
Trophy points
1,283
Activity points
1,388
hi,
is there a common name for a filter which resists to frequency change (change in time domain)?
for example;
Signal generator outputs Sin(2pi*t*f1) then if it changes to Sin(2pi*t*f2) , output of the filter shall smooth the frequency change from f1 to f2 in time domain.

I am a newbee in this topic,
thanks
 

If the term filter refers to a linear, time-invariant signal processing system (the usual understanding, I think), a filter can't do this, I believe. Of course a linear filter will "smooth" an abrupt change of frequency, but not result in a montone varying frequency with constant magnitude.

The best way to implement a smooth change with programmable transition time is probably a PLL.
 

From FvMs command I understand that Filter is a wrong name for this function.
So let me put it like this :
is there a function which response to frequency jumps in time domain and smooths this frequency transition (like a low pass filter in time amplitude space)
thanks
 

To use musician's terminology, you're asking if a glissando effect can be achieved in an electronic circuit.

An AC motor might qualify. Its rpm makes a smooth transition to a sudden frequency change.

However I've never seen a circuit that gives that sort of response.
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top