Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Facing a problem with A6 gsm 'AT+CMGR' command

Status
Not open for further replies.

YGSH

Newbie level 5
Newbie level 5
Joined
Feb 2, 2016
Messages
10
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Activity points
94
Hello everyone...
1) Facing a problem with A6 gsm module and don't know the solution.
When module receives new sms, it properly returns
+CIEV: "MESSAGE",1

+CMTI: "SM",0

Now if i use AT+CMGR=0 to read the sms, an error occurs +CME ERROR:58(don't know what it means?).
If again i tried the same AT command another error occurs +CMS ERROR:321
which means Invalid memory index.
So don't know how to read new sms :(

2) Everytime module receives new sms, it is saving on same location 0 .(which i think sholud be increased everytime as like sim800)

I also have sim800 module in which AT+CMGR command is working fine. But A6 creating a problem. :( :(
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top