Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Extracting and Saving IQ Data in File Using GNU Radio and USRP B210

P

PhdSA

Junior Member level 1
Junior Member level 1
Joined
Mar 18, 2024
Messages
16
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Activity points
199
I am currently working on detecting NB-IoT signals using the USRP B210. After converting this signal to baseband and obtaining the digital IQ data via the ADC, I need to save the IQ data as a file. This file will then be used as digital input for the Virtex-7 FPGA to decode the data. I am using GNU Radio for this project. Could you please guide me on how to axtract and save the IQ data as a file after converting the signal to baseband?
 

LaTeX Commands Quick-Menu:

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top