Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Export Antenna Model from Antenna Magus 5.1 To CST Microwave Studio 2014

Status
Not open for further replies.

integermaxwell

Newbie level 3
Joined
Aug 15, 2015
Messages
4
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Activity points
35
I have designed a fully parameterized 2x2 microstrip patch array using Antenna Magus 5.1 Pro and estimated performance successfully. But now I want to export the antenna to CST MWS using its 'export mode'. But the dialogue box is showing "No models available to export" and I've posted the screenshot here. What am I doing wrong ? Or how to do it right ? :bang: Please let me know asap as I got stuck in my new project and this is the first time I'm using Antenna Magus. Thanks in advance.

Capture.PNG
 

integermaxwell

Newbie level 3
Joined
Aug 15, 2015
Messages
4
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Activity points
35
you may be not selected the design

Would you please tell me from where I've to select the design step by step ? As you see I've selected the antenna in the new attached photo. Am I doing it wrong ? Please let me know. Thanks.Capture.PNG
 

Adnan Tariq

Junior Member level 2
Joined
Dec 7, 2014
Messages
20
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Activity points
134
i also want to export and run file in feko kindly help. Missing tabs of feko and cst in export mode of magus. It says no models available to exportss.png
 
Last edited:

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top