Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Evaluation Board for Buck Converter

Status
Not open for further replies.

chanchg

Member level 1
Joined
Mar 4, 2005
Messages
32
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,286
Activity points
1,537
Hi!!

I need to design an Evaluation Board for 1V-1.8V output, 2A Buck regulator. The input voltage can vary from 2.7V-6.4V. The load should be varying in nature(changes in load current with some slope).Can any one suggest standard design procedure to make this evaluation board?

Thanks in advance.
 

VVV

Advanced Member level 5
Joined
Nov 26, 2004
Messages
1,582
Helped
384
Reputation
768
Reaction score
88
Trophy points
1,328
Activity points
19,971
Do you need to breadboard the buck and you want to know how to test it?
Or do you need a board with the necessary circuitry to test a buck that you've already built?
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top