Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Ethernet PIC microcontroller

Status
Not open for further replies.

fouad_jh

Newbie level 5
Joined
Sep 18, 2006
Messages
10
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,347
pic18f ethernet

Hi all

Ethernet is everywhere these days, so I'm trying to design ethernet embeded system using PIC microcontroller PIC18F97J60.

Designing a board is ok and even to manifacture it, but plenty of efforts should be done developing application.

First challenge is that I need programmer for this microcontrooler which I can't really find.

Here we go, I hope that you are going to post your ideas or suggestions for helping me and to have information available on this forum aboout this new microcontroller.
 

csaba411

Member level 1
Joined
Jun 15, 2006
Messages
37
Helped
6
Reputation
12
Reaction score
1
Trophy points
1,288
Activity points
1,552
pic microcontroller ethernet

irst challenge is that I need programmer for this microcontrooler which I can't really find.

Microchip ICD2 or clones are capable to program this chip !!
 

fouad_jh

Newbie level 5
Joined
Sep 18, 2006
Messages
10
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,347
ethernet pic

Hi

Any clue where I can find ready made Board for the clone ones, and some practical code for PIC 18F97J60!!
 

scorpionss22

Full Member level 2
Joined
Jan 8, 2004
Messages
146
Helped
4
Reputation
8
Reaction score
1
Trophy points
1,298
Activity points
1,284
pic 18f97j60

HI my friend there is a very good book about desine ethernet card
in download upload forum
this book cover PIC and AVR microcontroller
 

fouad_jh

Newbie level 5
Joined
Sep 18, 2006
Messages
10
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,347
ethernet pic microcontroller

Hi everyone

Good to see some interested people in this topic, anyway scorpions22 I can't find the book you talked about.

However folks I will upload the PIC 18f97j60 library for eagle soon, may be more people will be interested and cooperate.

Regards
 

fouad_jh

Newbie level 5
Joined
Sep 18, 2006
Messages
10
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,347
pic ethernet 18f

Hi folks

Here is a PIC18F97J60 library file to be used with eagle, but you are on going to use at your own risk as I don't take any responsibility for anything, I just finished it but haven't tested it,

However if there is any error please write to me and I will try to sort it out.

Enjoy it

Hi there I'm sorry but there is a bug in this library I will fix it and post it soon.
 

atmaca

Full Member level 4
Joined
Jan 13, 2004
Messages
211
Helped
4
Reputation
8
Reaction score
2
Trophy points
1,298
Activity points
1,556
16f877 enc28j60

which ethernet chip will u use for your design
 

fouad_jh

Newbie level 5
Joined
Sep 18, 2006
Messages
10
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,347
pic 18f ethernet

I was thinking of using PIC18F97J60 but I'm afraid it's not yet widely available, so I believe the alternative will be the ENC28J60 with most probably 16F877A or 16F452.

Never mind, my first step is to find out what is available in the market then I will work on the design. It sounds odd to find out what is availabe and then design!
But I have got no choice.
 

fouad_jh

Newbie level 5
Joined
Sep 18, 2006
Messages
10
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,347
pic18f97j60 programmer

Hi folks

it looks like no one interested. nevermind, I'll start collecting what I need to work Ethernet with pic, Most probably ENC28J60 with PCI16F877.
So if you have any comments you are welcome to post it here.
 

xebbmw

Newbie level 5
Joined
Apr 21, 2005
Messages
10
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,344

fouad_jh

Newbie level 5
Joined
Sep 18, 2006
Messages
10
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,347
18f4550 ethernet

Hi

I found the links very usefull, thanks for that, and for the advice as well, I wanted to use PIC61f877 cause I've got programmer for it, but I thinkg I should use 18F microcontroller as you mentioned.
 

fouad_jh

Newbie level 5
Joined
Sep 18, 2006
Messages
10
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,347
interfacing 18f pic ethernet

Hi Guys

Here is the file after fixing a little bug.

regards
 

TechToys

Full Member level 2
Joined
May 16, 2006
Messages
146
Helped
24
Reputation
48
Reaction score
7
Trophy points
1,298
Activity points
2,308

fouad_jh

Newbie level 5
Joined
Sep 18, 2006
Messages
10
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,347
enc28j60 pic18f

Hi There

it's cool stuff but I already ordered Edtp " frame thrower" board with ENC28J60, which is ready built board and all you need to do is to interface to your microcontroller using SPI port

http://www.edtp.com/ft_page.htm
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top