Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Ethernet communication

Status
Not open for further replies.
S

saur

Member level 2
Member level 2
Joined
Feb 23, 2012
Messages
45
Helped
2
Reputation
4
Reaction score
2
Trophy points
1,288
Visit site
Activity points
1,621
Can anyone share with me, the basic procedure to establish an Ethernet connection between a computer and a microcontroller kit.

A flow diagram would also be great.

Thanks...
 

There are two types of chips that can connect you to lan. For example, Wiz5100 which implements tcp/ip and other protocol stacks and enc28j60 that implements only mac layer and needs to implement everything else on microcontroller.

It depends on what you need. Cheap solution or easy to implement solution...
 
Last edited:

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top