Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Error while using Nanotime

Status
Not open for further replies.
P

Prithvee

Newbie level 5
Joined
Sep 13, 2011
Messages
8
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,325
Hi

I am using Nanotime to generate critical path timing report to use in Tetramax and I am getting the following error.


ERROR:NetComp:0x30204008:cannot find subcircuit definition or function model AND2_X2 for instance XNAND2_1.
Error: Compiling netlist failed. (NLNK-002)

I would be glad if someone can help me out with this.

Thanks
 

Are you reading the netlist for AND2_X2 gate?
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top