Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

error occure while burning bootloader

Status
Not open for further replies.

kunal123

Advanced Member level 4
Joined
Jan 24, 2011
Messages
105
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,296
Location
mumbai
Activity points
1,961
hi,
i want to upload sketch in standalone circuit containing atmega328p using arduino uno r3, but enable to burn bootloader, please help me.

thanks
 

Hi,
If you can send the schematic then it would be easier to find out errors.

Any ways it is easier to burn the bootloader. First of all you need to burn the "arduino as isp" program on the uno board(This program is in the example list). Then wire the board as shown in the link below

https://arduino.cc/en/Tutorial/ArduinoToBreadboard

later on burn the bootloader into the chip which is external using the option "Burn bootloader using arduino as isp".

Just google a bit it is very simple. I have burnt bootloader into 20 chips in this way using uno R3.

Cheers,
pavan
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top