Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronic Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

TCAD-Simulation and Modeling

TCAD-Simulation and Modeling

Quick Overview

Category
Uncategorized
Language
Total members
57
Total events
0
Total discussions
22
Total views
2K
Total albums
0

Error in TCAD simulation

Status
Not open for further replies.

gold

Junior Member level 3
Joined
Oct 16, 2013
Messages
29
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Activity points
192
Hai everyone,

Currently, i'm working in sentaurus TCAD workbench. First, I have added a tool "SDE" in which I added several parameters and their values. Then I have added the tools like Sdevice, Inspect..
When i run those nodes, no error occur. Then I added a second value for a parameter (Ex: Lg). While i'm running those nodes, the errors occurred.
The error is:

The node '85' could not be submitted.
The prerequisite node '83' has the status 'none'.


But the status of the node it showed is 'none'. I don't know what the problem is. Can anyone tell the solution for this problem??
 

STMONO

Newbie level 1
Joined
May 8, 2015
Messages
0
Helped
0
Reputation
0
Reaction score
0
Trophy points
0
Activity points
0
I think you need to first run node 83 and then try to run node 85.
Sounds like node 83 is a prerequisite for node 85.
If you show a snapshot of your workbench here it is easier to find the problem.
 

Status
Not open for further replies.
Toggle Sidebar

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top