Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Error in spectre with cadence 6.1.5

Status
Not open for further replies.
A

a_wahba

Junior Member level 1
Joined
Mar 13, 2012
Messages
16
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Location
Zagazig, Egypt
Activity points
1,519
I have install cadence ic6.1.5 and MMSIM10 on Suse 11.4
when simulating a simple resistive circuit to check my installation

I get the following log file
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Cadence (R) Virtuoso (R) Spectre (R) Circuit Simulator
Version 10.1.0.204 32bit -- 14 Sep 2010
Copyright (C) 1989-2010 Cadence Design Systems, Inc. All rights reserved worldwide. Cadence, Virtuoso and Spectre are registered trademarks of Cadence Design Systems, Inc. All others are the property of their respective holders.

Protected by U.S. Patents:
5,610,847; 5,790,436; 5,812,431; 5,859,785; 5,949,992; 5,987,238;
6,088,523; 6,101,323; 6,151,698; 6,181,754; 6,260,176; 6,278,964;
6,349,272; 6,374,390; 6,493,849; 6,504,885; 6,618,837; 6,636,839;
6,778,025; 6,832,358; 6,851,097; 6,928,626; 7,024,652; 7,035,782;
7,085,700; 7,143,021; 7,493,240; 7,571,401.

Includes RSA BSAFE(R) Cryptographic or Security Protocol Software from RSA Security, Inc.

User: aya Host: linux-fnym HostID: 7F0200 PID: 25640
Memory available: 155.2875 MB physical: 3.9034 GB
CPU Type: Intel(R) Core(TM)2 Duo CPU E7500 @ 2.93GHz
Processor PhysicalID CoreID Frequency
0 0 0 2933.0
1 0 1 2933.0


Simulating `input.scs' on linux-fnym at 1:34:27 PM, Sat Oct 6, 2012 (process id: 25640).
Environment variable:
SPECTRE_DEFAULTS=-E
Command line:
/Tools/cadence/MMSIM/tools.lnx86/spectre/bin/32bit/spectre \
input.scs +escchars +log ../psf/spectre.out +inter=mpsc \
+mpssession=spectre0_25321_3 -format sst2 -raw ../psf \
+lqtimeout 900 -maxw 5 -maxn 5
spectre pid = 25640

Loading /Tools/cadence/MMSIM/tools.lnx86/tools.lnx86/cmi/lib/5.0/libinfineon_sh.so ...
Loading /Tools/cadence/MMSIM/tools.lnx86/tools.lnx86/cmi/lib/5.0/libphilips_sh.so ...
Loading /Tools/cadence/MMSIM/tools.lnx86/tools.lnx86/cmi/lib/5.0/libsparam_sh.so ...
Loading /Tools/cadence/MMSIM/tools.lnx86/tools.lnx86/cmi/lib/5.0/libstmodels_sh.so ...
/usr/lib/gcc/i586-suse-linux/4.5/cc1: /Tools/cadence/MMSIM/tools.lnx86/tools.lnx86/lib/libstdc++.so.6: version `GLIBCXX_3.4.14' not found (required by /usr/lib/libppl_c.so.4)
/usr/lib/gcc/i586-suse-linux/4.5/cc1: /Tools/cadence/MMSIM/tools.lnx86/tools.lnx86/lib/libstdc++.so.6: version `GLIBCXX_3.4.14' not found (required by /usr/lib/libppl.so.9)

Time for NDB Parsing: CPU = 638.902 ms, elapsed = 653.385 ms.
Time accumulated: CPU = 638.902 ms, elapsed = 653.385 ms.
Peak resident memory used = 28.1 Mbytes.


Time for Elaboration: CPU = 25.996 ms, elapsed = 28.2309 ms.
Time accumulated: CPU = 664.898 ms, elapsed = 681.783 ms.
Peak resident memory used = 33 Mbytes.


Time for EDB Visiting: CPU = 0 s, elapsed = 51.9753 us.
Time accumulated: CPU = 665.898 ms, elapsed = 682.11 ms.
Peak resident memory used = 33 Mbytes.


Error found by spectre during initial setup.
ERROR (SPECTRE-4080): There are no components in the circuit.


Aggregate audit (1:34:28 PM, Sat Oct 6, 2012):
Time used: CPU = 667 ms, elapsed = 683 ms, util. = 97.7%.
Time spent in licensing: elapsed = 604 ms, percentage of total = 88.4%.
Peak memory used = 33 Mbytes.
spectre completes with 1 error, 0 warnings, and 0 notices.
spectre terminated prematurely due to fatal error.
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

all the libraries (libstdc++so.6(GLIBXX3.4.14)), libppl_c.so.4, and libppl.so.9 are installed correctly

please help me to fix this error:cry:

thanks
 

a_wahba said:
I have install cadence ic6.1.5 and MMSIM10 on Suse 11.4
when simulating a simple resistive circuit to check my installation

I get the following log file
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Cadence (R) Virtuoso (R) Spectre (R) Circuit Simulator
Version 10.1.0.204 32bit -- 14 Sep 2010
Copyright (C) 1989-2010 Cadence Design Systems, Inc. All rights reserved worldwide. Cadence, Virtuoso and Spectre are registered trademarks of Cadence Design Systems, Inc. All others are the property of their respective holders.

Protected by U.S. Patents:
5,610,847; 5,790,436; 5,812,431; 5,859,785; 5,949,992; 5,987,238;
6,088,523; 6,101,323; 6,151,698; 6,181,754; 6,260,176; 6,278,964;
6,349,272; 6,374,390; 6,493,849; 6,504,885; 6,618,837; 6,636,839;
6,778,025; 6,832,358; 6,851,097; 6,928,626; 7,024,652; 7,035,782;
7,085,700; 7,143,021; 7,493,240; 7,571,401.

Includes RSA BSAFE(R) Cryptographic or Security Protocol Software from RSA Security, Inc.

User: aya Host: linux-fnym HostID: 7F0200 PID: 25640
Memory available: 155.2875 MB physical: 3.9034 GB
CPU Type: Intel(R) Core(TM)2 Duo CPU E7500 @ 2.93GHz
Processor PhysicalID CoreID Frequency
0 0 0 2933.0
1 0 1 2933.0


Simulating `input.scs' on linux-fnym at 1:34:27 PM, Sat Oct 6, 2012 (process id: 25640).
Environment variable:
SPECTRE_DEFAULTS=-E
Command line:
/Tools/cadence/MMSIM/tools.lnx86/spectre/bin/32bit/spectre \
input.scs +escchars +log ../psf/spectre.out +inter=mpsc \
+mpssession=spectre0_25321_3 -format sst2 -raw ../psf \
+lqtimeout 900 -maxw 5 -maxn 5
spectre pid = 25640

Loading /Tools/cadence/MMSIM/tools.lnx86/tools.lnx86/cmi/lib/5.0/libinfineon_sh.so ...
Loading /Tools/cadence/MMSIM/tools.lnx86/tools.lnx86/cmi/lib/5.0/libphilips_sh.so ...
Loading /Tools/cadence/MMSIM/tools.lnx86/tools.lnx86/cmi/lib/5.0/libsparam_sh.so ...
Loading /Tools/cadence/MMSIM/tools.lnx86/tools.lnx86/cmi/lib/5.0/libstmodels_sh.so ...
/usr/lib/gcc/i586-suse-linux/4.5/cc1: /Tools/cadence/MMSIM/tools.lnx86/tools.lnx86/lib/libstdc++.so.6: version `GLIBCXX_3.4.14' not found (required by /usr/lib/libppl_c.so.4)
/usr/lib/gcc/i586-suse-linux/4.5/cc1: /Tools/cadence/MMSIM/tools.lnx86/tools.lnx86/lib/libstdc++.so.6: version `GLIBCXX_3.4.14' not found (required by /usr/lib/libppl.so.9)

Time for NDB Parsing: CPU = 638.902 ms, elapsed = 653.385 ms.
Time accumulated: CPU = 638.902 ms, elapsed = 653.385 ms.
Peak resident memory used = 28.1 Mbytes.


Time for Elaboration: CPU = 25.996 ms, elapsed = 28.2309 ms.
Time accumulated: CPU = 664.898 ms, elapsed = 681.783 ms.
Peak resident memory used = 33 Mbytes.


Time for EDB Visiting: CPU = 0 s, elapsed = 51.9753 us.
Time accumulated: CPU = 665.898 ms, elapsed = 682.11 ms.
Peak resident memory used = 33 Mbytes.


Error found by spectre during initial setup.
ERROR (SPECTRE-4080): There are no components in the circuit.


Aggregate audit (1:34:28 PM, Sat Oct 6, 2012):
Time used: CPU = 667 ms, elapsed = 683 ms, util. = 97.7%.
Time spent in licensing: elapsed = 604 ms, percentage of total = 88.4%.
Peak memory used = 33 Mbytes.
spectre completes with 1 error, 0 warnings, and 0 notices.
spectre terminated prematurely due to fatal error.
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

all the libraries (libstdc++so.6(GLIBXX3.4.14)), libppl_c.so.4, and libppl.so.9 are installed correctly

please help me to fix this error:cry:

thanks
Click to expand...




I have the same problem. Did you solve this problem? I feel really :cry:

- - - Updated - - -

a_wahba said:
I have install cadence ic6.1.5 and MMSIM10 on Suse 11.4
when simulating a simple resistive circuit to check my installation

I get the following log file
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Cadence (R) Virtuoso (R) Spectre (R) Circuit Simulator
Version 10.1.0.204 32bit -- 14 Sep 2010
Copyright (C) 1989-2010 Cadence Design Systems, Inc. All rights reserved worldwide. Cadence, Virtuoso and Spectre are registered trademarks of Cadence Design Systems, Inc. All others are the property of their respective holders.

Protected by U.S. Patents:
5,610,847; 5,790,436; 5,812,431; 5,859,785; 5,949,992; 5,987,238;
6,088,523; 6,101,323; 6,151,698; 6,181,754; 6,260,176; 6,278,964;
6,349,272; 6,374,390; 6,493,849; 6,504,885; 6,618,837; 6,636,839;
6,778,025; 6,832,358; 6,851,097; 6,928,626; 7,024,652; 7,035,782;
7,085,700; 7,143,021; 7,493,240; 7,571,401.

Includes RSA BSAFE(R) Cryptographic or Security Protocol Software from RSA Security, Inc.

User: aya Host: linux-fnym HostID: 7F0200 PID: 25640
Memory available: 155.2875 MB physical: 3.9034 GB
CPU Type: Intel(R) Core(TM)2 Duo CPU E7500 @ 2.93GHz
Processor PhysicalID CoreID Frequency
0 0 0 2933.0
1 0 1 2933.0


Simulating `input.scs' on linux-fnym at 1:34:27 PM, Sat Oct 6, 2012 (process id: 25640).
Environment variable:
SPECTRE_DEFAULTS=-E
Command line:
/Tools/cadence/MMSIM/tools.lnx86/spectre/bin/32bit/spectre \
input.scs +escchars +log ../psf/spectre.out +inter=mpsc \
+mpssession=spectre0_25321_3 -format sst2 -raw ../psf \
+lqtimeout 900 -maxw 5 -maxn 5
spectre pid = 25640

Loading /Tools/cadence/MMSIM/tools.lnx86/tools.lnx86/cmi/lib/5.0/libinfineon_sh.so ...
Loading /Tools/cadence/MMSIM/tools.lnx86/tools.lnx86/cmi/lib/5.0/libphilips_sh.so ...
Loading /Tools/cadence/MMSIM/tools.lnx86/tools.lnx86/cmi/lib/5.0/libsparam_sh.so ...
Loading /Tools/cadence/MMSIM/tools.lnx86/tools.lnx86/cmi/lib/5.0/libstmodels_sh.so ...
/usr/lib/gcc/i586-suse-linux/4.5/cc1: /Tools/cadence/MMSIM/tools.lnx86/tools.lnx86/lib/libstdc++.so.6: version `GLIBCXX_3.4.14' not found (required by /usr/lib/libppl_c.so.4)
/usr/lib/gcc/i586-suse-linux/4.5/cc1: /Tools/cadence/MMSIM/tools.lnx86/tools.lnx86/lib/libstdc++.so.6: version `GLIBCXX_3.4.14' not found (required by /usr/lib/libppl.so.9)

Time for NDB Parsing: CPU = 638.902 ms, elapsed = 653.385 ms.
Time accumulated: CPU = 638.902 ms, elapsed = 653.385 ms.
Peak resident memory used = 28.1 Mbytes.


Time for Elaboration: CPU = 25.996 ms, elapsed = 28.2309 ms.
Time accumulated: CPU = 664.898 ms, elapsed = 681.783 ms.
Peak resident memory used = 33 Mbytes.


Time for EDB Visiting: CPU = 0 s, elapsed = 51.9753 us.
Time accumulated: CPU = 665.898 ms, elapsed = 682.11 ms.
Peak resident memory used = 33 Mbytes.


Error found by spectre during initial setup.
ERROR (SPECTRE-4080): There are no components in the circuit.


Aggregate audit (1:34:28 PM, Sat Oct 6, 2012):
Time used: CPU = 667 ms, elapsed = 683 ms, util. = 97.7%.
Time spent in licensing: elapsed = 604 ms, percentage of total = 88.4%.
Peak memory used = 33 Mbytes.
spectre completes with 1 error, 0 warnings, and 0 notices.
spectre terminated prematurely due to fatal error.
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

all the libraries (libstdc++so.6(GLIBXX3.4.14)), libppl_c.so.4, and libppl.so.9 are installed correctly

please help me to fix this error:cry:

thanks
Click to expand...




I have the same problem. Did you solve this problem? I feel really :cry:
 

Please!!! I'm ending my final project degree and, suddenly, when I was using "spectre" ocurred de same error (but only error 8040, no problems with libraries). I have been trying to do all kind of simulations, but always appear de same error. It's so frstrating!!!

Thanks!
 

the only solution I found that I have completely replace suse 11.4 by centos 6.3 and the simulation works well
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top